The NOAA ESRL GMD Carbon Cycle Interactive Atmospheric Data Visualization (IADV) Web site provides graphs of GMD data, including our most up-to-date measurements, to the scientific community, as well as the general public, educators, students, the press, business and government policymakers.
Visitors may
Data are freely available directly from the GMD FTP Server Before actual data are made available, they must undergo critical evaluation. Evaluation procedures ensure that (1) any standard reference gases used in making the measurements in Boulder and in the field are well characterized (i.e., calibrated before and after their use); (2) measurements compromised during collection or analysis are identified, and (3) valid measurements not representative of typical background conditions are identified. Quality control of the data requires considerable time and effort and is an essential part of GMD operations.
Warning: Preliminary data include GMD's most up-to-date data and have not yet been subjected to rigorous quality assurance procedures. Preliminary data viewed from this site are sometimes "pre-filtered" using tools designed to identify suspect values. Filtering is performed each time a data set containing preliminary data is requested. Filtering, however, cannot identify systematic experimental errors and will not be used in place of existing data assurance procedures. Thus, there exists the potential to make available preliminary data with systematic biases. In all graphs, preliminary data are clearly identified. Users are strongly encouraged to contact the appropriate program chief before attempting to interpret preliminary data.
The IADV home page displays an interactive map showing GMD sampling locations (Figure 1). Position the mouse over a marker to view additional information about the site. Depending on the setting of the 'Popup Detail' selection box, this information could be either the site name ('Brief'), a summary of available measurements from the site ('Full') or nothing at all. The Popup detail is set by selecting an option in the select box located on the right side of the bar on top of the map.
Select a sampling location in one of two ways:
The user's current selection is shown to the left of the map (Figure 2). By default, the IADV home page sets the current selection to Mauna Loa, Hawaii. Please note: The pulldown list in the bar above the map will show the currently selected location.
By clicking on the title of one of the programs, a list of plot types will slide down into view. You can then click on one of the links to be taken to a new page with the selected plot. More options for modifying the selected plot are available on the new page. The "Site Summary of ..." link will take you to another page with additional information for the selected site.
After clicking on a plot type link, you are taken to a page showing the desired plot type, along with options for changing some of the parameters of the plot. The number of options will depend on the plot type selected. Figure 3 shows an example of a time series plot.
Some plot types will show a button to save the dataset in the plot. . By clicking on this button, information about the dataset that is in the plot will be saved, which can be used later for making custom plots. Clicking on the 'View Saved Datasets' button will show the dataset information that has been saved so far.
To access the custom plot page, click on the 'Custom Plots' button . You will be taken to a new web page where you can edit the saved datasets, and specify those datasets that are to be plotted (Figure 4). Additional help for working with the saved datasets is available by clicking on the Help link on the Saved Datasets page.
The Custom Plots page is used to create custom graphs from saved datasets. These custom plots can overlay multiple datasets on one graph frame, and also include multi-panel graphs. Data sets can be saved from time series plots by clicking the 'Save Dataset' button for one or more sampling locations. Then click on the 'Custom Plots' button to begin with custom graphing. Click on the 'View Saved Datasets' button to view a list of your saved datasets.
Custom plots of saved datasets are currently available only for time series data. This option allows the user to create graphs with a specified X-axis, Y-axis, and data sets in one to six frames.
1. Edit Datasets and their plot attributes
The first section shows a list of the saved datasets. Options in this section are to
remove a dataset from the list, and to modify the plot attributes of a dataset, such as marker symbol and color.
2. Select datasets, Y axis scaling and title for each plot frame
The Y Axis section is used to select which data sets will be shown in a plot frame. Up to 6 plot frames can be
shown on the plot, and any number of datasets can be shown in each frame.
3. Select X Axis Scaling and Title
The X Axis section is used to set the time range of the frames in the plot.
4. Select Options
The Options section is used to set additional options for the plot, such as showing grids and legends, and adjusting
the size and color of the plot page.
5. Press 'Submit' button to create your plot.
The last section just has a button for creation of the plot. Once the 'Submit' button is pressed,
the desired plot will be created and shown. This may take several moments to create. A PDF copy of the
custom plot is also made, and can be seen by clicking on the 'PDF Version' link.
Request for Feedback
We welcome your suggestions and comments regarding this site. Please e-mail your comments to Kirk Thoning (kirk.thoning@noaa.gov). If the site does not appear to be operating correctly, include in your e-mail the name and version of the browser, operating system, and a complete description of problem.